Toyota 4Runner & FJ Cruiser Billet Aluminium Front Sway Bar Relocation Kit for 2"+ Lift Setups 2010 - 2024 (Non-KDSS Models / Replaces 48824-60190)

Restore proper front suspension geometry on your lifted Toyota 4Runner or FJ Cruiser with this premium billet aluminium front sway bar relocation kit, precision CNC-machined for permanent durability and optimal sway bar alignment after 2"+ lift modifications. After installing a 2-inch or larger lift on your 4Runner or FJ Cruiser, the factory sway bar mounting position becomes geometrically misaligned with the lifted suspension travel — causing increased chassis noise from sway bar interference with suspension components, uncoordinated suspension movement, reduced cornering support on uneven terrain, and diminished steering precision. Standard shim solutions deform under load and use corrosion-prone hardware that fails over time. This relocation kit solves all three problems with rigid billet aluminium brackets that shift the sway bar mounting position 1" forward, restoring optimal sway bar angle and proper suspension coordination for lifted overland and off-road builds.

Features:

• Lightweight and durable construction – billet aluminium material delivers exceptional strength while keeping weight low for off-road and overland applications
• CNC machined precision – ensures high dimensional accuracy for perfect fitment to factory sway bar mounting points
• Anodized surface finish – delivers rust-proof and anti-corrosion protection for sustained outdoor, off-road, and weather exposure
• High-strength grade 10.9 mounting screws – included Dacromet-finished hardware delivers superior strength and corrosion resistance compared to standard fasteners
• Sway bar forward shift design – relocates the front sway bar 1" forward to optimize geometry on vehicles with 2"+ lift modifications, eliminating interference and restoring proper suspension function
• Complete installation kit – includes brackets, high-strength screws, and spacers needed for professional-grade installation
• Direct OE replacement design – installs to factory mounting locations with included hardware

Specifications:

• Condition: 100% Brand New
• Type: Front Sway Bar Relocation Kit (1" Forward Shift)
• Material: Billet Aluminium
• Construction: CNC Machined
• Surface Finish: Anodized
• Mounting Hardware: Grade 10.9 High-Strength Screws with Dacromet Coating
• Item Weight: 0.961 kg
• Quantity: Complete Kit (2 Brackets + 8 Screws + 4 Spacers)
• Mounting Position: Above Factory Sway Bar Mounting Bracket
• Position on Vehicle: Front
• Designed For: 2"+ Lift Modifications
• Purpose: Sway Bar Geometry Correction / Lift Compensation

OE / Replacement Part Numbers:

• 48824-60190

Fitment:

Non-KDSS models only. KDSS-equipped vehicles use a different sway bar system and are NOT compatible.

• Toyota 4Runner – Non-KDSS (2010 – 2024)
• Toyota FJ Cruiser – Non-KDSS (2010 – 2014)
• Designed specifically for vehicles with 2-inch or larger lift modifications – not intended for stock-height vehicles
• Compatible with factory sway bar mounting points only – not compatible with KDSS (Kinetic Dynamic Suspension System) equipped vehicles which use a hydraulically interconnected sway bar system
• Confirm vehicle model, lift height, and KDSS configuration before ordering

Contents:

• 2x Billet Aluminium Sway Bar Relocation Brackets
• 8x Grade 10.9 High-Strength Mounting Screws (Dacromet Finish)
• 4x Spacers

Benefits:

• Restores proper sway bar geometry on lifted 4Runner and FJ Cruiser builds – eliminating the noise, interference, and handling compromises that develop with stock sway bar positioning at 2"+ lift heights
• Eliminates chassis noise caused by sway bar interference with suspension components – the persistent clunking and rubbing sounds common to lifted vehicles with unmodified sway bar positioning are resolved
• Improves cornering support and traction on bumpy off-road terrain – correct sway bar geometry allows the suspension to articulate properly while maintaining body control
• Restores steering precision and predictable handling on lifted vehicles – proper sway bar alignment ensures consistent suspension response under all driving conditions
• Billet aluminium construction delivers significantly higher durability than standard shim solutions – will not deform or fail under sustained off-road loads
• Grade 10.9 Dacromet-coated hardware provides superior corrosion resistance compared to standard zinc-plated fasteners – critical for vehicles exposed to mud, water, and salt during off-road use
• Significant value for serious overland and off-road builders – addresses a real geometry problem with a permanent quality solution
• Compatible with the entire 2010-2024 4Runner production range and 2010-2014 FJ Cruiser – versatile upgrade for the popular Toyota off-road platform

Installation Notes:

• Lift requirement: This kit is specifically designed for vehicles with 2-inch or larger lift modifications. Installing on stock-height vehicles will NOT improve geometry and may actually create new interference issues
• KDSS incompatibility: This kit will NOT fit KDSS (Kinetic Dynamic Suspension System) equipped 4Runner or FJ Cruiser models. KDSS vehicles use a hydraulically interconnected sway bar system with different mounting geometry
• Verify your vehicle is non-KDSS before ordering – KDSS-equipped vehicles can be identified by the hydraulic actuator visible at the sway bar mounting point
• Properly support the front of the vehicle on jack stands rated for the vehicle weight before beginning installation – never work under a vehicle supported only by a jack
• Loosen the factory sway bar mounting hardware before removal to ensure smooth installation of the new brackets
• Position the relocation brackets above the factory sway bar mounting bracket location – use the included spacers as required for proper alignment
• Tighten the included grade 10.9 mounting screws to manufacturer-specified torque values – do not overtighten, which can damage the aluminium brackets
• Verify proper sway bar clearance and free movement through the full suspension travel range after installation – check for any interference points before driving
• Test handling and chassis behavior at low speeds before aggressive driving – verify resolved chassis noise and improved suspension response
• Professional installation recommended if you are unfamiliar with suspension modification procedures
• If unsure about compatibility with your specific 4Runner or FJ Cruiser variant, lift configuration, or KDSS status, contact our team with your year, model, lift height, and suspension configuration before ordering

Warranty:

• 12-month standard warranty from date of purchase
• Contact our support team for assistance with any issues